| MiniPlex-Lite MiniPlex-2S MiniPlex-2USB MiniPlex-2S/BT |
MiniPlex-2USB/BT MiniPlex-2E MiniPlex-2Wi Windows 7 Driver installation |
Manuals of previous version of our multiplexers can be found here.
The drivers below are suitable for all multiplexers with a USB port.
| Windows |
USB driver V2.08.14. This driver is for all multiplexer types and the USB-Serial converter. Supports Windows 7, Vista, XP, 2000 and Server 2003/2008 (32 and 64 bit). |
| Mac OS X 10.4 to 10.7 | USB driver V2.2.17 for Mac OS X 10.4 (Tiger) and up. Solves the bug with disappearing MiniPlex port names. |
From V3.00 and up, the firmware (internal software) in the MiniPlex-2 series multiplexers can be updated. To perform an update, download the desired firmware image file to your computer, start MPX-Config and use menu option File -> Update Firmware... to select the downloaded file and start the update process. A new version of MPX-Config may be required after the update, to utilize new functions of the multiplexer.
See the Changelog for details about the updates.
| MiniPlex-2 V3.13.2 | Bugfix, resolves WiFi connection problems with the MiniPlex-2Wi |
| MiniPlex-2 V3.13.0 | Bugfix, addition of VTG to VHW conversion (GPS to log) and small modifications. |
| MiniPlex-2 V3.12.0 | Bugfix and small additions. |
| MiniPlex-2 V3.11 | Bugfix for V3.10. |
| MiniPlex-2 V3.10 | Universal firmware V3.10 for all MiniPlex-2 multiplexers. Requires MPX-Config V3.31 or up to configure the multiplexer. |
| MiniPlex-2 V3.00 | Universal firmware V3.00 for all MiniPlex-2 multiplexers. |
MPX-Config is the configuration tool used for altering the settings of the MiniPlex multiplexers. From time to time we improve the firmware of the multiplexers and add new options. These options must be supported by MPX-Config. It is therefore important to match the version of MPX-Config to the version of the firmware in the multiplexer. The table below lists the matching combinations. An explanation about version numbers can be found here.
See the Changelog for details about the updates.
| MPX-Config version | Firmware version | Description |
| MPX-Config V3.7.1 | 3.13.x | In V3.7.0 the Capture button misteriously disappeared. The button is restored. |
| MPX-Config V3.5.1 | 3.10 - 3.12.x | Bugfix. Previous versions did not set the default route properly when loading a configuration file. |
| MPX-Config V3.21 | 3.00 | Bugfix of V3.20: On computers with only one serial port, clicking on a control resulted in error message "Unable to write to serial port".
Supports the MiniPlex-2 series (-2S, -2USB en -2BT) from firmware versions 3.00 and up. |
| MPX-Config V3.13 | 2.10 - 2.12 | Supports the MiniPlex-2 series (-2S, -2USB en -2BT) |
| MPX-Config V3.01 | 2.9.0 - 2.9.5 | Supports the new range of multiplexers (-S, -USB en -BT) |
| MPX-Config V2.42 | 2.2.0 - 2.8.1 | Support of AIS mode on BT multiplexers added. Bugfix: statusbar shows loaded configuration file again. |
| MPX-Config V2.31BT | 2.4.0 - 2.6.3 (Bluetooth) |
Special version for the MiniPlex-41BT/42BT V2.4.0 to V2.6.3. These multiplexers have an AIS mode but this is not reported to MPX-Config. This special version of MPX-Config always lists AIS mode in the Mode of Operation selector. |
| MPX-Config V1.42 | 1.30 - 2.1.x | A bug is fixed which prevented the automatic baud rate detection to work when the multiplexer was set to 38400 baud.
This version of MPX-config is for all older multiplexers with firmware version below 2.2.0. |
| MiniPlex config tool for OS X | MiniPlex config tool for Mac OS X. It requires OS X 10.3.9 or later and is a Universal Binary allowing it to run natively on PowerPC and Intel Macs. The disk image contains two versions (V2.10 and V3.10), one for the MiniPlex series and one for the MiniPlex-2 series of multiplexers. |
| FTClean | Utility to completely remove all MiniPlex related driver files and registry entries. Use only for Windows 2000 and XP. |