| V3.7.4 | After a firmware update, reading the configuration always resulted in a “Multiplexer does not respond” message. This is fixed. Menu item Update Firmware is now disabled when no connection with the multiplexer exists. The ‘W’ column in the Filter & Routing list is now disabled when the multiplexer has no Bluetooth or WiFi interface. Selecting a command from the Manual Sentence Input history used to execute this command immediately. You now need to press the enter key or click on the Send button. Some older version complained about a missing ftd2xx.dll file, this is fixed. |
| V3.7.3 | A Connect button is added which makes it easier to work with IP addresses. The Manual NMEA Sentence Input now has a command history, which allows selecting previously entered commands. |
| V3.7.1 | In V3.7.0 the Capture button misteriously disappeared. The button is restored. |
| V3.7.0 | Option added for the MiniPlex-2E. The 'MiniPlex Search Results' window now has a button to restore the network settings of a MiniPlex-2E to its factory defaults. |
| V3.6.0 | Bugfix and support for the new options of firmware version 3.13.x. |
| V3.5.1 | Bugfix. Previous versions did not set the default route properly when loading a configuration file. |
| V3.50 | Support for the MiniPlex-2E added (network configuration). |
| V3.32 | New version for firmware V3.10. Also a bugfix for V3.30 in combination with multiplexers with a serial port, where updating the firmware sometimes not worked at 115200 Baud. This is now done at 38400 Baud. |